-
KL5111 | Bus Terminal, 1-channel encoder interface, incremental, 24В VВ DCВ HTL, 250В kHz
0,00 ₽The KL5111 Bus Terminal is an interface for the direct connection of 24В V incremental encoders. A 16В bit counter with a quadrature decoder and a 16В bit latch for the zero pulse can be read, set or enabled. The state of the counter is transmitted quickly and securely to the PC, PLC or CNC over the fieldbus. Interval measurement with a resolution of 200В ns is possible. Up to 64 incremental encoders can be connected to a Bus Coupler.
-
KL5121 | Bus Terminal, 1-channel encoder interface, incremental, 24В VВ DCВ HTL, 250В kHz, with 4В xВ digital output 24В VВ DC, linear path control
0,00 ₽The KL5121 Bus Terminal can be used to implement a linear path control. The terminal reads an incremental signal, which can be supplied by an incremental encoder or a pulse generator, and switches the outputs when the counter reaches a previously defined state. The counter states can be transmitted to the terminal by the higher-level automation device in the form of a table. The position is acquired with the aid of the latch input, which is activated/deactivated by the gate input. Up to four 24 V outputs can be switched. The LEDs indicate the states of the signals at the various inputs and outputs.
-
KL5151 | Bus Terminal, 1-channel encoder interface, incremental, 24В VВ DCВ HTL, 100В kHz
0,00 ₽The KL5151 Bus Terminal is an interface for connecting a 24 V incremental encoder (24 V HTL). A 32-bit counter with quadrature decoder and a 32-bit latch for the zero pulse can be read, set or activated. Alternatively, the KL5151 can be used as an up/down counter. The 24 V supply to the encoder can be provided directly via the terminal connection points.
-
KL5152 | Bus Terminal, 2-channel encoder interface, incremental, 24В VВ DCВ HTL, 100В kHz
0,00 ₽The KL5152 Bus Terminal is an interface for connecting two 24 V incremental encoders (24 V HTL). A 16-bit counter with quadrature decoder and a 16-bit latch for the zero pulse can be read, set or activated. The KL5152 indicates the logical state of the signals via the LEDs. The 24 V supply to the encoder can be provided directly via the terminal connection points.
