-
EP9214-0023 | EtherCAT Box, 4/4-channel power distribution, for EtherCAT Box modules
0,00 ₽EP9214-0023 позволяет подключать четыре ветви питания EtherCAT Box. В каждой ветви 24 В контролируется, ограничивается и при необходимости отключается потребление тока для управляющего напряжения US и периферийного напряжения UP.
-
EP9224-0023 | EtherCAT Box, 4/4-channel power distribution, for EtherCAT Box modules, with current measurement/data loggingPreferred type
0,00 ₽The EP9224-0023 enables connection of four EtherCAT Box power supply branches. In each 24В V branch the current consumption for the control voltage US and the peripheral voltage UP is monitored, limited, and, if necessary, switched off.
-
EP9224-0024 | EtherCAT Box, 4/4-channel power distribution, for EtherCAT Box modules, with current measurement/data logging, M12, L-codedNew
0,00 ₽The EP9224-0024 enables connection of four EtherCAT Box power supply branches. In each 24В V branch the current consumption for the control voltage US and the peripheral voltage UP is monitored, limited, and, if necessary, switched off.
-
EP9224-2037 | EtherCAT Box, 4-port junction, with power supply, ENP, B17
0,00 ₽The EP9224-2037 allows the distribution of one B17 ENP input to four EtherCAT ports and M8 power supply ports with B17-ENP forwarding. In each voltage branch, the current consumption for control voltage US and peripheral voltage UP is monitored, limited and, if necessary, switched off.
-
EP9300-0022 | EtherCAT Box, PROFINETВ RT
0,00 ₽The EP9300-0022 EtherCAT Box connects PROFINET RT networks to the EtherCAT Box modules (EPxxxx, ERxxxx and EQxxxx) and converts the telegrams from PROFINET RT to EtherCAT. One station consists of an EP9300-0022 and any number of EtherCAT Box modules. The box is connected to PROFINET RT via a D-coded M12 socket (in/out). With EtherCAT, the PROFINET RT box can use the powerful and ultra-fast I/O system with its large selection of EtherCAT Box modules. The EP9300-0022 supports the PROFINET RT profile and seamlessly fits into PROFINET RT networks.
-
EP9521-0020 | EtherCAT Box, media converter, Ethernet/EtherCAT, 100В Mbit/s, 24В VВ DC
0,00 ₽The EtherCAT/Industrial Ethernet module EP9521-0020 for Industrial Fast Ethernet/100В Mbit/s serves as media converter from optical fiber to copper and vice versa. The media converter is suitable for multi-mode fiber-optic cables and is used for direct transfer between the two media. The media converter operates bidirectionally and collision-free with constant delay. It can be diagnosed as a separate EtherCAT device. In this way, unlike standard media converters, it enables fast link control and the safe closing of the EtherCAT strand even in the event of a fault. Since the transfer direction (copper to optical fiber | optical fiber to copper) is relevant for the bus, the device can be configured via a switch. Via this switch “Link Loss Forwarding” for normal Ethernet operation can also be selected.
-
EPX1058-0022 | EtherCAT Box, 8-канальный цифровой вход, NAMUR, M12, ExВ i
0,00 ₽EtherCAT Box EPX1058-0022 получает сигналы от полевых устройств NAMUR в соответствии с IECВ 60947-5-6. Датчики питаются напряжением 8,2В В и возвращают диагностируемый токовый сигнал. Таким образом, в дополнение к состоянию переключения можно обнаружить обрыв провода или короткое замыкание. Светодиоды показывают состояние сигнала или любые ошибки, канал за каналом.
-
EPX3158-0022 | EtherCAT Box, 8-канальный аналоговый вход, ток, 4–20 мА, 16 бит, несимметричный, M12, ExВ i
0,00 ₽Коробка EtherCAT EPX3158-0022 позволяет напрямую подключать искробезопасные полевые устройства, расположенные в опасных зонах, классифицированных как зона 0/20 или 1/21. Она питает измерительные преобразователи, расположенные в поле, и передает их аналоговые измерительные сигналы, электрически изолированные, на устройство автоматизации. С техническим диапазоном измерений +107% от номинального диапазона коробка также поддерживает ввод в эксплуатацию со значениями датчика в предельном диапазоне и оценку в соответствии с NAMUR NE43. Светодиоды ошибок указывают на состояние перегрузки и обрыв провода.
-
EPX3184-0022 | EtherCAT Box, 4-channel analog input, current, 4…20 mA, 16 bit, single-ended, M12, HART, Ex i
0,00 ₽The EPX3184-0022 analog EtherCAT Box allows intrinsically safe HART-capable field devices from hazardous areas of zones 0/20 and 1/21 to be directly connected. It supplies measuring transducers located in the field and transmits their analog measuring signals to the automation device under electrical isolation. The EtherCAT Box indicates the status of the HART communication via LEDs and signals any communication errors.
-
EPX3184-0022 | EtherCAT Box, 4-channel analog input, current, 4…20 mA, 16 bit, single-ended, M12, HART, Ex i
0,00 ₽The EPX3184-0022 analog EtherCAT Box allows intrinsically safe HART-capable field devices from hazardous areas of zones 0/20 and 1/21 to be directly connected. It supplies measuring transducers located in the field and transmits their analog measuring signals to the automation device under electrical isolation. The EtherCAT Box indicates the status of the HART communication via LEDs and signals any communication errors.
-
EPX3184-0092 | EtherCAT Box, 4-channel analog input, current, 4…20 mA, 16 bit, single-ended, M12, HART, Ex i, TwinSAFE SCNew
0,00 ₽The EPX3184-0092 analog EtherCAT Box allows intrinsically safe HART-capable field devices from hazardous areas of zones 0/20 and 1/21 to be directly connected. It supplies measuring transducers located in the field and transmits their analog measuring signals to the automation device under electrical isolation. The EtherCAT Box indicates the status of the HART communication via LEDs and signals any communication errors.
