-
IP3102-B318 | Fieldbus Box, 4-channel analog input, PROFIBUS, voltage, В±10В V, 16В bit, differential, M12, integrated T-connector
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-B510 | Fieldbus Box, 4-channel analog input, CANopen, voltage, В±10В V, 16В bit, differential, M12
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-B518 | Fieldbus Box, 4-канальный аналоговый вход, CANopen, напряжение, ±10 В, 16 бит, дифференциальный, M12, встроенный T-образный разъем
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-B520 | Fieldbus Box, 4-канальный аналоговый вход, DeviceNet, напряжение, ±10 В, 16 бит, дифференциальный, M12
0,00 ₽Аналоговый входной модуль IP3102 обрабатывает сигналы в диапазоне от -10 до +10 В В. Напряжение оцифровывается с разрешением 16 В бит и передается, электрически изолированным, на устройство автоматизации более высокого уровня. Четыре входных канала имеют дифференциальные входы и обладают общим внутренним потенциалом заземления. Приложенное вспомогательное напряжение (которое может иметь любое значение до 30 В В постоянного тока) подается для питания датчика. Таким образом, например, можно подавать на измерительный потенциометр 10 В В постоянного тока от внешнего источника напряжения.
-
IP3102-B528 | Fieldbus Box, 4-channel analog input, DeviceNet, voltage, В±10В V, 16В bit, differential, M12, integrated T-connector
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3112-B310 | Fieldbus Box, 4-channel analog input, PROFIBUS, current, 0/4…20 mA, 16 bit, differential, M12
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3112-B318 | Fieldbus Box, 4-channel analog input, PROFIBUS, current, 0/4…20 mA, 16 bit, differential, M12, integrated T-connector
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3112-B518 | Fieldbus Box, 4-channel analog input, CANopen, current, 0/4…20 mA, 16 bit, differential, M12, integrated T-connector
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3112-B520 | Fieldbus Box, 4-канальный аналоговый вход, DeviceNet, ток, 0/4–20 В мА, 16 В бит, дифференциальный, M12
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3202-B310 | Fieldbus Box, 4-channel analog input, PROFIBUS, temperature, RTD (Pt100), 16В bit, M12
0,00 ₽The IP3202 analog input module allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1В°C in the temperature range of Pt100 sensors in 4-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs.
-
IP3202-B510 | Fieldbus Box, 4-канальный аналоговый вход, CANopen, температура, RTD (Pt100), 16В бит, M12
0,00 ₽Аналоговый входной модуль IP3202 позволяет подключать датчики сопротивления напрямую. Схемы модуля позволяют управлять датчиками с использованием 2-, 3- или 4-проводных методов подключения. Линеаризация во всем диапазоне температур осуществляется с помощью микропроцессора. Диапазон температур может быть выбран свободно. Модуль также может использоваться для простого измерения сопротивления с выходом в омах. Стандартные настройки модуля: разрешение 0,1°C в диапазоне температур датчиков Pt100 при 4-проводном подключении. Неисправности датчика, такие как обрыв проводов, отображаются светодиодами ошибок.
-
IP3202-B518 | Fieldbus Box, 4-channel analog input, CANopen, temperature, RTD (Pt100), 16В bit, M12, integrated T-connector
0,00 ₽The IP3202 analog input module allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1В°C in the temperature range of Pt100 sensors in 4-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs.
-
IP3202-B520 | Fieldbus Box, 4-channel analog input, DeviceNet, temperature, RTD (Pt100), 16В bit, M12
0,00 ₽The IP3202 analog input module allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1В°C in the temperature range of Pt100 sensors in 4-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs.
-
IP3312-B318 | Fieldbus Box, 4-channel analog input, PROFIBUS, temperature, thermocouple, M12, integrated T-connector
0,00 ₽The IP3312 analog input module permits four thermocouples to be directly connected. The module’s circuit can operate thermocouple sensors using the 2-wire technique. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The error LEDs indicate a broken wire. Compensation for the cold junction is made through a temperature measurement in the connecting plugs. This means that standard extension leads can be connected. The IP3312 can also be used for mV measurement.
-
IP3312-Bxxx | Fieldbus Box, 4-channel analog input, temperature, thermocouple, M12
0,00 ₽The IP3312 analog input module permits four thermocouples to be directly connected. The module’s circuit can operate thermocouple sensors using the 2-wire technique. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The error LEDs indicate a broken wire. Compensation for the cold junction is made through a temperature measurement in the connecting plugs. This means that standard extension leads can be connected. The IP3312 can also be used for mV measurement.
