-
AS1020 | stepper motor, holding torque 0.5 Nm, N1 (NEMA17/42В mm)
0,00 ₽The AS1000 stepper motors with flange codes from 42В to 86В mm (N1 = NEMA17, N2 = NEMA23, N3 = NEMA34) and torques from 0.4В to 5В Nm are ideally suited for use as auxiliary axes and positioning drives. They are characterized by robustness and high holding torques. Due to the integrated micro-stepping the motors can position very well even without a feedback system and require only a motion terminal for power electronics. Stepper motors can also be operated with TwinCAT NCВ PTP for synchronization functions such as cam plates or flying saws.
-
AS1050 | stepper motor, holding torque 1.2 Nm, N2 (NEMA23/56В mm)
0,00 ₽The AS1000 stepper motors with flange codes from 42В to 86В mm (N1 = NEMA17, N2 = NEMA23, N3 = NEMA34) and torques from 0.4В to 5В Nm are ideally suited for use as auxiliary axes and positioning drives. They are characterized by robustness and high holding torques. Due to the integrated micro-stepping the motors can position very well even without a feedback system and require only a motion terminal for power electronics. Stepper motors can also be operated with TwinCAT NCВ PTP for synchronization functions such as cam plates or flying saws.
-
AS1060 | stepper motor, holding torque 5.0 Nm, N3 (NEMA34/86В mm)
0,00 ₽The AS1000 stepper motors with flange codes from 42В to 86В mm (N1 = NEMA17, N2 = NEMA23, N3 = NEMA34) and torques from 0.4В to 5В Nm are ideally suited for use as auxiliary axes and positioning drives. They are characterized by robustness and high holding torques. Due to the integrated micro-stepping the motors can position very well even without a feedback system and require only a motion terminal for power electronics. Stepper motors can also be operated with TwinCAT NCВ PTP for synchronization functions such as cam plates or flying saws.
-
AS2021 | Stepper motor, holding torque 0.8 Nm, N2 (NEMA23/56В mm)
0,00 ₽The AS2000 two-phase stepper motors with a stepper angle of 1.8В° shrink the gap to the AM8000 high-performance servomotor. With their flange codes N2 (NEMA23) and N3 (NEMA34), the stepper motors comply with international standards. Users can select from seven models ranging from 0.8 to 8В Nm.
-
AS2023 | stepper motor, holding torque 2.3 Nm, N2 (NEMA23/56В mm)
0,00 ₽The AS2000 two-phase stepper motors with a stepper angle of 1.8В° shrink the gap to the AM8000 high-performance servomotor. With their flange codes N2 (NEMA23) and N3 (NEMA34), the stepper motors comply with international standards. Users can select from seven models ranging from 0.8 to 8В Nm.
-
AS2023-0Hy0 | stepper motor 1.8 Nm (M0), N2 (NEMA23/56В mm)
0,00 ₽Двухфазные шаговые двигатели AS2000 с углом шага 1,8° сокращают разрыв с высокопроизводительным серводвигателем AM8000. Благодаря кодам фланцев N2 (NEMA23) и N3 (NEMA34) шаговые двигатели соответствуют международным стандартам. Пользователи могут выбирать из семи моделей в диапазоне от 0,8 до 8Нм.
-
AS2023-0Jy0 | шаговый двигатель, удерживающий момент 2,3 Нм, N2 (NEMA23/56В мм)
0,00 ₽The AS2000 two-phase stepper motors with a stepper angle of 1.8В° shrink the gap to the AM8000 high-performance servomotor. With their flange codes N2 (NEMA23) and N3 (NEMA34), the stepper motors comply with international standards. Users can select from seven models ranging from 0.8 to 8В Nm.
-
AS2043 | Stepper motor, holding torque 8.0 Nm, N3 (NEMA34/86В mm)
0,00 ₽The AS2000 two-phase stepper motors with a stepper angle of 1.8В° shrink the gap to the AM8000 high-performance servomotor. With their flange codes N2 (NEMA23) and N3 (NEMA34), the stepper motors comply with international standards. Users can select from seven models ranging from 0.8 to 8В Nm.
