EK9020 | Modbus TCP/UDP Bus Coupler

The EK9020 Bus Coupler is the successor of the EK9000. It connects Ethernet networks to the EtherCAT Terminals (ELxxxx) as well as the EtherCAT Box modules (EPxxxx) and converts the telegrams from Ethernet to the E-bus signal representation. One station consists of an EK9020 and any number of EtherCAT Terminals. The coupler is connected to Ethernet via RJ45. In EtherCAT, the Ethernet coupler has at its disposal a lower-level, powerful and ultra-fast I/O system with a large selection of terminals. The coupler supports the Modbus TCP protocol and fits seamlessly into Ethernet networks.

0,00 ₽

Артикул: EK9020 Категорий: EKxxxx | Bus Coupler, EtherCAT Terminals, Home Page, I/O, Products

Описание

Technical dataEK9020

Task within EtherCAT system	coupling of standard digital and analog EtherCAT Terminals and EtherCAT Box modules to Ethernet networks
Number of EtherCAT Terminals	depending on the process data size
Type/number of peripheral signals	depending on the process data size
Protocol	Modbus TCP, Modbus UDP
Data transfer rates	100/1000 Mbit/s
Configuration	not required
Bus interface	2 x RJ45 (switched)
Power supply	24 V DC (-15%/+20%)
Input current	typ. 120 mA + (total E-bus current)/4
Current consumption E-bus	up to 2 A
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	-25вЂ¦+60В°C/-40вЂ¦+85В°C
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Relative humidity	95%, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.	IP20/see documentation
Approvals/markings	CE

Каталог

RFC1010B-335

SER2915L-472

EK9020 | Modbus TCP/UDP Bus Coupler

Похожие товары

0801406:0061 (НАЗНАЧЕННЫЙ БЛОК ДЛЯ МАРКИРОВКИ)

Линза черная плоская 17,5×18,3 пластик 03-921.0

Кнопка с подсветкой SA 2, модель 03-619.011