AT2200 | EcoLine motor module, straight, without infeedNew

The AT2200 motor module is an element for setting up straight XTS track sections. Simply plugging them together is sufficient to establish an electrical connection between these motor modules. With one power supply, a maximum of 6 motor modules can be plugged together one after the other in a 3В m long infeed line. The standardized length of 500В mm enables finely scalable system lengths and represents an economical alternative to standard motor modules.

0,00 ₽

Артикул: AT2200 Категорий: AT2xxx, ATH2xxx | XTS motor modules, Home Page, Motion, Products, XTS | Linear product transport

Описание

System dataAT220x

Magnet pitch	в‰ҐВ 70В mm
Geometries	any (by combination with segments of the standard motor modules)
Alignment	horizontally, vertically or at any angle from 1вЂ¦179В°
Peak force	AT9001-x550 (5-pin): 80В N (specification refer to straight sections)
Continuous force	AT9001-x550 (5-pin): 30В N (specification refers to straight sections)
Max. speed	4В m/s
Max. acceleration	10В g
Payload	up to 10В kg, higher loads with reduced dynamics
Cycle time	250 Вµs
Absolute accuracy
Repeatability
System size	>В 100В m, >В 200В movers
Protection rating	IP65 (in assembled condition for a closed system, only waterproof for a short time, not corrosion resistant)
Approvals/markings	CE, UL
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4

Каталог

MSD1278H-105

LPZ3010-334

AT2200 | EcoLine motor module, straight, without infeedNew

Похожие товары

Штифт-соединитель RCPT 0.032-0.046 с накаткой 0358-0-15-01-34-01-10-0

Кабель 2COND 12AWG Чёрный 250 футов (артикул 01368.15.01)

0800543:0009 (Блок маркер терминала)