-
EL5001-0011 | EtherCAT Terminal, 1-channel encoder interface, SSI, monitor
0,00 ₽The EL5001-0011 SSI monitor EtherCAT Terminal is used for monitoring the data exchange between SSI master and SSI encoder (slave). The encoder is powered via the existing SSI interface. The interface circuit makes the incoming data stream available to the controller as a data word in the process image. Various operating modes can be permanently set via the control register.
-
EL5001-0090 | Терминал EtherCAT, 1-канальный интерфейс кодера, SSI, TwinSAFEВ SC
0,00 ₽Терминал EtherCAT EL5001-0090 является ведущим устройством SSI и обеспечивает прямое подключение абсолютного энкодера с SSI (синхронный последовательный интерфейс). Поддерживаются как однооборотные, так и многооборотные энкодеры. Питание энкодера 24 В может быть подано напрямую через точки подключения терминала. Терминал блока питания EL9505 может использоваться для дополнительного рабочего напряжения энкодера 5 В.
-
EL5002 | EtherCAT Terminal, 2-channel encoder interface, SSI
0,00 ₽The EL5002 EtherCAT Terminal is an SSI master and enables the direct connection of two absolute encoders with SSI (synchronous serial interface). Both singleturn and multiturn encoders are supported. An EL91xx power supply terminal can be used for a 24В V supply to the encoder, and the EL9505 for the optional 5В V encoder operating voltage.
-
EL5021 | EtherCAT Terminal, 1-channel encoder interface, SinCos, 1В VPP
0,00 ₽The EL5021 EtherCAT Terminal is used for the direct connection of a measuring probe or encoder with sinusoidal, differential voltage output 1В VPP. Input frequencies of max. 250В kHz can be evaluated. The current counter reading can be zeroed (reset) or stored separately via the C track of the encoder, which is also called reference mark. The 5В V supply to the encoder is provided directly via the terminal connection points. The EL5021 features amplitude and frequency error detection of the input signals.
-
EL5031-0011 | EtherCAT Terminal, 1-channel encoder interface, EnDat® 2.2, oversamplingNew
0,00 ₽The EL5031-0011 is used for the direct connection of an encoder with an EnDat® 2.2 interface. The bidirectional interface enables automatic reading of position values, diagnostic data, internal and external temperature values, and the electronic nameplate of the encoder. The EL5031-0011 is characterized by the fact that the position values for finer resolution are processed according to the oversampling principle. An encoder supply of 5 V – or optionally 9 V – is also provided. Extensive functions enable both cost-effective and faster commissioning.
-
EL5032 | EtherCAT Terminal, 2-channel encoder interface, EnDat® 2.2
0,00 ₽The EL5032 is used for direct connection of two encoders with EnDat® 2.2 interface. The bidirectional interface enables automatic readout of position values, diagnostic data as well as internal and external temperature values and the electronic nameplate of the encoder. In addition, the EL5032 provides an encoder supply of 5В V or optionally 9В V. Extensive functions enable a cost-effective and shortened commissioning.
-
EL5032-0090 | Терминал EtherCAT, 2-канальный интерфейс кодера, EnDat® 2.2, TwinSAFEВ SC
0,00 ₽The EL5032-0090 is used for direct connection of two encoders with EnDat® 2.2 interface. The bidirectional interface enables automatic readout of position values, diagnostic data as well as internal and external temperature values and the electronic nameplate of the encoder. In addition, the EL5032-0090 provides an encoder supply of 5В V or optionally 9В V.
-
EL5042 | EtherCAT Terminal, 2-channel encoder interface, BiSS® C
0,00 ₽The EL5042 EtherCAT Terminals is a BiSS® C master and enables the direct connection of an absolute encoder with BiSS® C or SSI interface. Both singleturn and multiturn encoders are supported. The EL5042 also provides an encoder supply of 5В V or optionally 9В V.
-
EL5101 | EtherCAT Terminal, 1-channel encoder interface, incremental, 5В VВ DC (DIFFВ RS422,В TTL), 1В MHz
0,00 ₽The EL5101 EtherCAT Terminal is an interface for the direct connection of incremental encoders with differential signals (RS422) or TTL single ended signals. Input frequencies up to 1В MHz can be evaluated. Two additional 24В V digital inputs are available for storing, blocking and setting the counter status. The error message output of an encoder can be connected and evaluated via the status input. The 5В V and 24В V supply of the encoder can be provided directly via the terminal connection points.
-
EL5101-0011 | EtherCAT Terminal, 1-channel encoder interface, incremental, 5В VВ DC (DIFFВ RS422), 5В MHz, oversampling
0,00 ₽The EL5101-0011 EtherCAT Terminal is an interface for the direct connection of incremental encoders with differential signals (RS422). It processes the signals for a finer resolution of position values according to the oversampling principle. The 5В V and 24В V supply of the encoder can be provided directly via the terminal connection points.
-
EL5101-0090 | Терминал EtherCAT, 1-канальный интерфейс энкодера, инкрементальный, 5 В постоянного тока (DIFF RS422, TTL), 1 МГц, TwinSAFE SC
0,00 ₽Терминал EtherCAT EL5101-0090 представляет собой интерфейс для прямого подключения инкрементальных энкодеров с дифференциальными сигналами (RS422) или односторонними сигналами TTL. Два дополнительных цифровых входа 24 В доступны для хранения, блокировки и установки состояния счетчика. Выход сообщения об ошибке энкодера может быть подключен и оценен через вход состояния. Питание 5 В и 24 В энкодера может быть предоставлено напрямую через точки подключения терминала.
-
EL5102 | EtherCAT Terminal, 2-channel encoder interface, incremental, 5В VВ DC (DIFFВ RS422,В TTL,В openВ collector), 5В MHz
0,00 ₽The EL5102 EtherCAT Terminal is an interface for the direct connection of two incremental encoders with differential signals (RS422) or single ended signals (TTL and open collector), parameterizable per channel. Input frequencies up to 5В MHz can be processed. Two additional 24В V digital inputs are available for storing, blocking and setting the counter status. It is also possible to set the counter to a predefined value or to lock the counter directly through the process data. The error message output of an encoder can be connected and evaluated via the status input. The 5В V, 12В V or 24В V supply of the encoder can be provided directly via the terminal connection points.
-
EL5112 | EtherCAT Terminal, 2-channel encoder interface, incremental, 5В VВ DC (DIFFВ RS422,В TTL,В openВ collector), 5В MHz, 2В xВ AB/1В xВ ABCPreferred type
0,00 ₽The EL5112 EtherCAT Terminal is an interface for the direct connection of two incremental encoders with A and B track or one encoder with A, B and C track. Encoders with differential signals (RS422) or single-ended signals (TTL and open collector) can be connected. Input frequencies up to 5В MHz can be processed. In 2-channel mode, one 24В V digital input per channel is available for storing, blocking and setting the counter status, in 1-channel operation, both inputs can be used. It is also possible to set the counter to a predefined value or to lock the counter directly through the process data. The 5В V, 12В V or 24В V supply of the encoder can be provided directly via the terminal connection points.
-
EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental, 24В VВ DCВ HTL, 100В kHz, withВ 1В xВ digitalВ output 24В VВ DC
0,00 ₽The EL5151-0021 EtherCAT Terminal is an interface for the connection of a 24В V incremental encoder (24В VВ HTL). An additional 24В V digital input is available for storing the counter status. A compare function can be realized via a parameterizable 24В VВ DC output, which is set after reaching a preset counter value. The output is switched independently of the PLC cycle. The integrated workpiece measurement function enables logging of the start and end values of the counter. The measurement is triggered by the digital input. Both values are output separately as 32-bit values.
-
ELX5151-0090 | Терминал EtherCAT, 1-канальный интерфейс кодера, инкрементальный, NAMUR, ExВ i, TwinSAFEВ SC
0,00 ₽The ELX5151-0090 EtherCAT Terminal allows the direct connection of an intrinsically safe incremental encoder from zone 0/20 and 1/21 hazardous areas. The terminal supplies the encoder with 8.2В VВ DC and evaluates a diagnostic-capable NAMUR signal according to IEC 60947-5-6. In this way, a wire breakage or short circuit can be detected in addition to the switching state. The ELX5151-0090 can also be used as an up/down counter and allows switching between 16- and 32-bit counting.
