-
IP5009-B520 | Fieldbus Box, 1-channel encoder interface, DeviceNet, SSI, M23
0,00 ₽Интерфейсный модуль IP5009 SSI позволяет напрямую подключать кодер SSI. Питание кодера осуществляется через интерфейс SSI. Интерфейсная схема генерирует импульс для считывания кодера и делает входящий поток данных доступным для контроллера в виде слова данных в образе процесса. Модуль может опционально предоставлять данные в виде двоичных чисел или двоичного кода Грея. Различные режимы работы, частоты передачи и битовые ширины могут постоянно храниться в регистре управления.
-
IP5009-Bxxx | Fieldbus Box, 1-channel encoder interface, SSI, M23
0,00 ₽The IP5009 SSI interface module allows an SSI encoder to be connected directly. The encoder is powered via the SSI interface. The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. The module can optionally provide the data as binary numbers or as a binary gray code. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register.
-
IP5109-B310 | Fieldbus Box, 1-channel encoder interface, PROFIBUS, incremental, 5В VВ DC (DIFFВ RS422,В TTL), 1В MHz, M23
0,00 ₽The IP5109 module is an interface for the direct connection of incremental encoders with differential inputs (RS485) or with single inputs. A 16В bit counter with a quadrature decoder and a 16В bit latch for the zero pulse can be read, set or enabled. The inputs can optionally be used as complementary or as single inputs. Incremental encoders with alarm outputs can be connected at the interface’s status input. Interval measurement with a resolution of 200В ns is possible. The gate input allows the counter to be halted (high = stop). The value is read with a rising edge at the latch input.
-
IP5109-B318 | Fieldbus Box, 1-channel encoder interface, PROFIBUS, incremental, 5В VВ DC (DIFFВ RS422,В TTL), 1В MHz, M23, integrated T-connector
0,00 ₽The IP5109 module is an interface for the direct connection of incremental encoders with differential inputs (RS485) or with single inputs. A 16В bit counter with a quadrature decoder and a 16В bit latch for the zero pulse can be read, set or enabled. The inputs can optionally be used as complementary or as single inputs. Incremental encoders with alarm outputs can be connected at the interface’s status input. Interval measurement with a resolution of 200В ns is possible. The gate input allows the counter to be halted (high = stop). The value is read with a rising edge at the latch input.
-
IP5109-B528 | Fieldbus Box, 1-channel encoder interface, DeviceNet, incremental, 5В VВ DC (DIFFВ RS422,В TTL), 1В MHz, M23, integrated T-connector
0,00 ₽The IP5109 module is an interface for the direct connection of incremental encoders with differential inputs (RS485) or with single inputs. A 16В bit counter with a quadrature decoder and a 16В bit latch for the zero pulse can be read, set or enabled. The inputs can optionally be used as complementary or as single inputs. Incremental encoders with alarm outputs can be connected at the interface’s status input. Interval measurement with a resolution of 200В ns is possible. The gate input allows the counter to be halted (high = stop). The value is read with a rising edge at the latch input.
-
IP5109-Bxxx | Fieldbus Box, 1-channel encoder interface, incremental, 5В VВ DC (DIFFВ RS422,В TTL), 1В MHz, M23
0,00 ₽The IP5109 module is an interface for the direct connection of incremental encoders with differential inputs (RS485) or with single inputs. A 16В bit counter with a quadrature decoder and a 16В bit latch for the zero pulse can be read, set or enabled. The inputs can optionally be used as complementary or as single inputs. Incremental encoders with alarm outputs can be connected at the interface’s status input. Interval measurement with a resolution of 200В ns is possible. The gate input allows the counter to be halted (high = stop). The value is read with a rising edge at the latch input.
-
IP6002-B310 | Fieldbus Box, 2-channel communication interface, PROFIBUS, serial, RS232, M12
0,00 ₽The IP6002 serial interface module allows the connection of devices with an RS232 interface, which operates in conformity with the CCITT V.28/DIN 66 259-1 standards. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200 baud, while a 128 bytes receive buffer and a 16 bytes send buffer are available. The RS232 interface guarantees high immunity to interference through electrically isolated signals.
-
IP6002-B518 | Fieldbus Box, 2-channel communication interface, CANopen, serial, RS232, M12, integrated T-connector
0,00 ₽The IP6002 serial interface module allows the connection of devices with an RS232 interface, which operates in conformity with the CCITT V.28/DIN 66 259-1 standards. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200 baud, while a 128 bytes receive buffer and a 16 bytes send buffer are available. The RS232 interface guarantees high immunity to interference through electrically isolated signals.
-
IP6012-B318 | Fieldbus Box, 2-channel communication interface, PROFIBUS, serial, TTY, 20 mA, M12, integrated T-connector
0,00 ₽The IP6012 serial interface module allows the connection of devices with a 20 mA current interface. The interface operates passively. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200 baud, while a 128 bytes receive buffer and a 16 bytes send buffer are available. The current interface guarantees high immunity to interference through electrically isolated signals with injected current.
-
IP6022-B318 | Fieldbus Box, 2-channel communication interface, PROFIBUS, serial, RS422/RS485, M12, integrated T-connector
0,00 ₽The IP6022 serial interface module allows the connection of devices with a RS422 or RS485 interface. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200В baud, while a 128В bytes receive buffer and a 16В bytes send buffer are available. The transmission of differential signals according to RS232 guarantees high immunity to interference through electrically isolated signals.
-
IP6022-B510 | Fieldbus Box, 2-channel communication interface, CANopen, serial, RS422/RS485, M12
0,00 ₽The IP6022 serial interface module allows the connection of devices with a RS422 or RS485 interface. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200В baud, while a 128В bytes receive buffer and a 16В bytes send buffer are available. The transmission of differential signals according to RS232 guarantees high immunity to interference through electrically isolated signals.
-
IP6022-B518 | Fieldbus Box, 2-channel communication interface, CANopen, serial, RS422/RS485, M12, integrated T-connector
0,00 ₽The IP6022 serial interface module allows the connection of devices with a RS422 or RS485 interface. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200В baud, while a 128В bytes receive buffer and a 16В bytes send buffer are available. The transmission of differential signals according to RS232 guarantees high immunity to interference through electrically isolated signals.
