-
IP2312-B318 | Fieldbus Box, 4-channel digital input + 4-channel digital output, PROFIBUS, 24В VВ DC, 0.2В ms, 0.5В A, M12, integrated T-connector
0,00 ₽The IP2312-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 0.5В A, are short-circuit-proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2312-B518 | Fieldbus Box, 4-channel digital input + 4-channel digital output, CANopen, 24В VВ DC, 0.2В ms, 0.5В A, M12, integrated T-connector
0,00 ₽The IP2312-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 0.5В A, are short-circuit-proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2312-B520 | Fieldbus Box, 4-channel digital input + 4-channel digital output, DeviceNet, 24В VВ DC, 0.2В ms, 0.5В A, M12
0,00 ₽The IP2312-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 0.5В A, are short-circuit-proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2312-B528 | Fieldbus Box, 4-channel digital input + 4-channel digital output, DeviceNet, 24В VВ DC, 0.2В ms, 0.5В A, M12, integrated T-connector
0,00 ₽The IP2312-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 0.5В A, are short-circuit-proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2321-B510 | Fieldbus Box, 4-channel digital input + 4-channel digital output, CANopen, 24В VВ DC, 3В ms, 2В A, M8
0,00 ₽The IP2321-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M8 screw type connectors.
-
IP2321-B518 | Fieldbus Box, 4-channel digital input + 4-channel digital output, CANopen, 24В VВ DC, 3В ms, 2В A, M8, integrated T-connector
0,00 ₽The IP2321-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M8 screw type connectors.
-
IP2322-B510 | Fieldbus Box, 4-channel digital input + 4-channel digital output, CANopen, 24В VВ DC, 3В ms, 2В A, M12
0,00 ₽The IP2322-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2322-B528 | Fieldbus Box, 4-channel digital input + 4-channel digital output, DeviceNet, 24В VВ DC, 3В ms, 2В A, M12, integrated T-connector
0,00 ₽The IP2322-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2322-Bxxx | Fieldbus Box, 4-channel digital input + 4-channel digital output, 24В VВ DC, 3В ms, 2В A, M12
0,00 ₽The IP2322-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2331-B310 | Fieldbus Box, 4-channel digital input + 4-channel digital output, PROFIBUS, 24В VВ DC, 0.2В ms, 2В A, M8
0,00 ₽The IP2331-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M8 screw type connectors.
-
IP2331-B520 | Fieldbus Box, 4-channel digital input + 4-channel digital output, DeviceNet, 24В VВ DC, 0.2В ms, 2В A, M8
0,00 ₽The IP2331-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M8 screw type connectors.
-
IP2331-Bxxx | Fieldbus Box, 4-channel digital input + 4-channel digital output, 24В VВ DC, 0.2В ms, 2В A, M8
0,00 ₽The IP2331-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M8 screw type connectors.
-
IP2332-B528 | Fieldbus Box, 4-channel digital input + 4-channel digital output, DeviceNet, 24В VВ DC, 0.2В ms, 2В A, M12, integrated T-connector
0,00 ₽The IP2332-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2332-Bxxx | Fieldbus Box, 4-channel digital input + 4-channel digital output, 24В VВ DC, 0.2В ms, 2В A, M12
0,00 ₽The IP2332-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2В A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4В A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2В A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via M12 screw type connectors.
-
IP2401-B510 | Fieldbus Box, 8-канальный цифровой вход + 8-канальный цифровой выход, CANopen, 24 В В пост. тока, 3 В мс, 0,5 В А, M8
0,00 ₽The IP2401-Bxxx digital I/O module has sixteen channels that can be used as eight inputs and eight outputs. . The signals are connected through M8 screw type connectors, both of which have four pins (with separate input and output pins). Adapter cables are available for use in input-only or output-only cases, as well as connectors for field assemby. It is also possible to use the power supply cable directly as the sensor cable. The outputs handle load currents of up to 0.5В A, are short-circuit proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes.
-
IP2401-B518 | Fieldbus Box, 8-channel digital input + 8-channel digital output, CANopen, 24В VВ DC, 3В ms, 0.5В A, M8, integrated T-connector
0,00 ₽The IP2401-Bxxx digital I/O module has sixteen channels that can be used as eight inputs and eight outputs. . The signals are connected through M8 screw type connectors, both of which have four pins (with separate input and output pins). Adapter cables are available for use in input-only or output-only cases, as well as connectors for field assemby. It is also possible to use the power supply cable directly as the sensor cable. The outputs handle load currents of up to 0.5В A, are short-circuit proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes.
-
IP2401-B520 | Fieldbus Box, 8-channel digital input + 8-channel digital output, DeviceNet, 24В VВ DC, 3В ms, 0.5В A, M8
0,00 ₽The IP2401-Bxxx digital I/O module has sixteen channels that can be used as eight inputs and eight outputs. . The signals are connected through M8 screw type connectors, both of which have four pins (with separate input and output pins). Adapter cables are available for use in input-only or output-only cases, as well as connectors for field assemby. It is also possible to use the power supply cable directly as the sensor cable. The outputs handle load currents of up to 0.5В A, are short-circuit proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes.
-
IP2401-B528 | Fieldbus Box, 8-channel digital input + 8-channel digital output, DeviceNet, 24В VВ DC, 3В ms, 0.5В A, M8, integrated T-connector
0,00 ₽The IP2401-Bxxx digital I/O module has sixteen channels that can be used as eight inputs and eight outputs. . The signals are connected through M8 screw type connectors, both of which have four pins (with separate input and output pins). Adapter cables are available for use in input-only or output-only cases, as well as connectors for field assemby. It is also possible to use the power supply cable directly as the sensor cable. The outputs handle load currents of up to 0.5В A, are short-circuit proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes.
-
IP2401-Bxxx | Fieldbus Box, 8-channel digital input + 8-channel digital output, 24В VВ DC, 3В ms, 0.5В A, M8
0,00 ₽The IP2401-Bxxx digital I/O module has sixteen channels that can be used as eight inputs and eight outputs. . The signals are connected through M8 screw type connectors, both of which have four pins (with separate input and output pins). Adapter cables are available for use in input-only or output-only cases, as well as connectors for field assemby. It is also possible to use the power supply cable directly as the sensor cable. The outputs handle load currents of up to 0.5В A, are short-circuit proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes.
-
IP2512-B318 | Fieldbus Box, 2-канальный выход ШИМ, PROFIBUS, 24 В В пост. тока, 2,5 В А, M12, встроенный Т-образный соединитель
0,00 ₽Выходы модуля IP2512 обеспечивают широтно-импульсную модулированную версию двоичного сигнала. Коэффициент ключа задается 10-битным значением из блока автоматизации. Выход защищен от перегрузки и короткого замыкания. Помимо режима работы ШИМ, выходы также могут быть частотно-модулированными или использоваться для управления шаговыми двигателями с заданными импульсами и направлением. Модуль содержит два канала, которые показывают свое состояние с помощью светодиодов. Светодиоды управляются синхронно с выходами и показывают коэффициент ключа своей яркостью.
-
IP2512-B528 | Fieldbus Box, 2-channel PWM output, DeviceNet, 24В VВ DC, 2.5В A, M12, integrated T-connector
0,00 ₽The outputs of the IP2512 module provide a pulse width modulated version of a binary signal. The keying ratio is prescribed by a 10 bit value from the automation unit. The output is protected against overload and short circuit. In addition to the PWM operating mode, the outputs can also be frequency modulated or used to control stepper motors with specified pulses and direction. The module contains two channels that indicate their state by means of light emitting diodes. The LEDs are driven in time with the outputs and show the keying ratio by their brightness.
-
IP3102-B318 | Fieldbus Box, 4-channel analog input, PROFIBUS, voltage, В±10В V, 16В bit, differential, M12, integrated T-connector
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-B510 | Fieldbus Box, 4-channel analog input, CANopen, voltage, В±10В V, 16В bit, differential, M12
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-B518 | Fieldbus Box, 4-канальный аналоговый вход, CANopen, напряжение, ±10 В, 16 бит, дифференциальный, M12, встроенный T-образный разъем
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-B528 | Fieldbus Box, 4-channel analog input, DeviceNet, voltage, В±10В V, 16В bit, differential, M12, integrated T-connector
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3102-Bxxx | Fieldbus Box, 4-канальный аналоговый вход, напряжение, ±10 В В, 16 В бит, дифференциальный, M12
0,00 ₽The IP3102 analog input module handles signals in the range from -10 to +10В V. The voltage is digitized to a resolution of 16В bits and transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. It is thus possible, for instance, to supply a measuring potentiometer with 10В VВ DC from an external voltage source.
-
IP3112-B310 | Fieldbus Box, 4-channel analog input, PROFIBUS, current, 0/4…20 mA, 16 bit, differential, M12
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3112-B318 | Fieldbus Box, 4-channel analog input, PROFIBUS, current, 0/4…20 mA, 16 bit, differential, M12, integrated T-connector
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3112-B518 | Fieldbus Box, 4-channel analog input, CANopen, current, 0/4…20 mA, 16 bit, differential, M12, integrated T-connector
0,00 ₽The IP3112 analog input module handles signals in the range from 0/4 to 20В mA. The input current is digitized to a resolution of 16В bits (the default is 15В bits) and is transmitted, electrically isolated, to the higher-level automation device. The four input channels have differential inputs and possess a common, internal ground potential. The applied auxiliary voltage (which can be any value up to 30В VВ DC) is fed through to supply the sensor. The module is quite versatile, but default settings have been selected in such a way that in most cases it is not necessary to perform configuration. The input filter and associated conversion times can be set within a wide range, several data output formats may be chosen. If required, the inputs can be scaled differently. Automatic limit monitoring is also available. Parameterization may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module.
-
IP3202-B310 | Fieldbus Box, 4-channel analog input, PROFIBUS, temperature, RTD (Pt100), 16В bit, M12
0,00 ₽The IP3202 analog input module allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1В°C in the temperature range of Pt100 sensors in 4-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs.
-
IP3202-B510 | Fieldbus Box, 4-канальный аналоговый вход, CANopen, температура, RTD (Pt100), 16В бит, M12
0,00 ₽Аналоговый входной модуль IP3202 позволяет подключать датчики сопротивления напрямую. Схемы модуля позволяют управлять датчиками с использованием 2-, 3- или 4-проводных методов подключения. Линеаризация во всем диапазоне температур осуществляется с помощью микропроцессора. Диапазон температур может быть выбран свободно. Модуль также может использоваться для простого измерения сопротивления с выходом в омах. Стандартные настройки модуля: разрешение 0,1°C в диапазоне температур датчиков Pt100 при 4-проводном подключении. Неисправности датчика, такие как обрыв проводов, отображаются светодиодами ошибок.
-
IP3202-B518 | Fieldbus Box, 4-channel analog input, CANopen, temperature, RTD (Pt100), 16В bit, M12, integrated T-connector
0,00 ₽The IP3202 analog input module allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1В°C in the temperature range of Pt100 sensors in 4-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs.
-
IP3202-B520 | Fieldbus Box, 4-channel analog input, DeviceNet, temperature, RTD (Pt100), 16В bit, M12
0,00 ₽The IP3202 analog input module allows resistance sensors to be connected directly. The module’s circuitry can operate the sensors using 2-, 3- or 4-wire connection techniques. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The module can also be used for simple resistance measurement with the output in ohms. The module’s standard settings are: resolution 0.1В°C in the temperature range of Pt100 sensors in 4-wire connection. Sensor malfunctions such as broken wires are indicated by error LEDs.
-
IP3312-B318 | Fieldbus Box, 4-channel analog input, PROFIBUS, temperature, thermocouple, M12, integrated T-connector
0,00 ₽The IP3312 analog input module permits four thermocouples to be directly connected. The module’s circuit can operate thermocouple sensors using the 2-wire technique. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The error LEDs indicate a broken wire. Compensation for the cold junction is made through a temperature measurement in the connecting plugs. This means that standard extension leads can be connected. The IP3312 can also be used for mV measurement.
-
IP3312-B520 | Fieldbus Box, 4-канальный аналоговый вход, DeviceNet, температура, термопара, M12
0,00 ₽Аналоговый входной модуль IP3312 позволяет напрямую подключать четыре термопары. Схема модуля может управлять термопарными датчиками с использованием 2-проводной технологии. Линеаризация во всем диапазоне температур осуществляется с помощью микропроцессора. Диапазон температур может быть выбран свободно. Светодиоды ошибок указывают на обрыв провода. Компенсация холодного спая выполняется путем измерения температуры в соединительных разъемах. Это означает, что можно подключать стандартные удлинители. IP3312 также может использоваться для измерения мВ.
-
IP3312-B528 | Fieldbus Box, 4-канальный аналоговый вход, DeviceNet, температура, термопара, M12, встроенный T-образный разъем
0,00 ₽Аналоговый входной модуль IP3312 позволяет напрямую подключать четыре термопары. Схема модуля может управлять термопарными датчиками с использованием 2-проводной технологии. Линеаризация во всем диапазоне температур осуществляется с помощью микропроцессора. Диапазон температур может быть выбран свободно. Светодиоды ошибок указывают на обрыв провода. Компенсация холодного спая выполняется путем измерения температуры в соединительных разъемах. Это означает, что можно подключать стандартные удлинители. IP3312 также может использоваться для измерения мВ.
-
IP3312-Bxxx | Fieldbus Box, 4-channel analog input, temperature, thermocouple, M12
0,00 ₽The IP3312 analog input module permits four thermocouples to be directly connected. The module’s circuit can operate thermocouple sensors using the 2-wire technique. Linearization over the full temperature range is realized with the aid of a microprocessor. The temperature range can be selected freely. The error LEDs indicate a broken wire. Compensation for the cold junction is made through a temperature measurement in the connecting plugs. This means that standard extension leads can be connected. The IP3312 can also be used for mV measurement.
-
IP4112-B310 | Fieldbus Box, 4-channel analog output, PROFIBUS, current, 0/4…20 mA, 16 bit, single-ended, M12
0,00 ₽The IP4112 analog output module generates analog output signals in the range from 0/4 to 20В mA. The power is supplied to the process level with a resolution of 15В bits (default), and is electrically isolated. If the input is transmitted without an arithmetical sign, 16В bit resolution may also be selected. If necessary, the output scaling can be altered.
-
IP4112-B518 | Fieldbus Box, 4-канальный аналоговый выход, CANopen, ток, 0/4–20 В мА, 16 В бит, несимметричный, M12, встроенный T-образный соединитель
0,00 ₽Модуль аналогового вывода IP4112 формирует аналоговые выходные сигналы в диапазоне от 0/4 до 20В мА. Питание подается на уровень процесса с разрешением 15В бит (по умолчанию), и электрически изолирован. Если вход передается без арифметического знака, то также может быть выбрано разрешение 16В бит. При необходимости масштабирование выходного сигнала может быть изменено.
-
IP4112-B520 | Fieldbus Box, 4-channel analog output, DeviceNet, current, 0/4…20 mA, 16 bit, single-ended, M12
0,00 ₽The IP4112 analog output module generates analog output signals in the range from 0/4 to 20В mA. The power is supplied to the process level with a resolution of 15В bits (default), and is electrically isolated. If the input is transmitted without an arithmetical sign, 16В bit resolution may also be selected. If necessary, the output scaling can be altered.
-
IP4112-B528 | Fieldbus Box, 4-channel analog output, DeviceNet, current, 0/4…20 mA, 16 bit, single-ended, M12, integrated T-connector
0,00 ₽The IP4112 analog output module generates analog output signals in the range from 0/4 to 20В mA. The power is supplied to the process level with a resolution of 15В bits (default), and is electrically isolated. If the input is transmitted without an arithmetical sign, 16В bit resolution may also be selected. If necessary, the output scaling can be altered.
-
IP4132-B310 | Fieldbus Box, 4-channel analog output, PROFIBUS, voltage, В±10В V, 16В bit, differential, M12
0,00 ₽The IP4132 analog output module generates analog output signals in the range from -10 to +10В V. The voltage is supplied to the process level with a resolution of 16В bits, and is electrically isolated. If necessary, the output scaling can be altered.
-
IP4132-B318 | Fieldbus Box, 4-channel analog output, PROFIBUS, voltage, В±10В V, 16В bit, differential, M12, integrated T-connector
0,00 ₽The IP4132 analog output module generates analog output signals in the range from -10 to +10В V. The voltage is supplied to the process level with a resolution of 16В bits, and is electrically isolated. If necessary, the output scaling can be altered.
-
IP4132-B518 | Fieldbus Box, 4-канальный аналоговый выход, CANopen, напряжение, ±10 В, 16 бит, дифференциальный, M12, встроенный T-образный разъем
0,00 ₽Модуль аналогового вывода IP4132 формирует аналоговые выходные сигналы в диапазоне от -10 до +10В В. Напряжение подается на уровень процесса с разрешением 16В бит, и имеет электрическую развязку. При необходимости масштабирование выходного сигнала может быть изменено.
-
IP4132-B520 | Fieldbus Box, 4-channel analog output, DeviceNet, voltage, В±10В V, 16В bit, differential, M12
0,00 ₽The IP4132 analog output module generates analog output signals in the range from -10 to +10В V. The voltage is supplied to the process level with a resolution of 16В bits, and is electrically isolated. If necessary, the output scaling can be altered.
-
IP4132-Bxxx | Fieldbus Box, 4-channel analog output, voltage, В±10В V, 16В bit, differential, M12
0,00 ₽The IP4132 analog output module generates analog output signals in the range from -10 to +10В V. The voltage is supplied to the process level with a resolution of 16В bits, and is electrically isolated. If necessary, the output scaling can be altered.
-
IP5009-B518 | Fieldbus Box, 1-channel encoder interface, CANopen, SSI, M23, integrated T-connector
0,00 ₽The IP5009 SSI interface module allows an SSI encoder to be connected directly. The encoder is powered via the SSI interface. The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. The module can optionally provide the data as binary numbers or as a binary gray code. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register.
