| Technology | DMX master terminal | DMX slave terminal |
| Data transfer channels | RS485 physics/half duplex | |
| Data transfer rates | 250 kbit, one start bit, two stop bits | |
| Interfaces | RS485, termination resistor can be switched, half duplex | |
| Bus device | max. 32 without repeater | – |
| Line impedance | 120 О© | |
| Power supply | via the E-bus | |
| Distributed clocks | – | |
| Electrical isolation | 500 V (E-bus/signal voltage) | |
| Protocol | DMX512 | |
| Bit width in the process image | variable | |
| Configuration | no address setting, configuration via PLC | |
| Current consumption power contacts | – | |
| Current consumption E-bus | typ. 130 mA | |
| Special features | supports RDM protocol, library available, electrically isolated | start address and data length can be set |
| Weight | approx. 55 g | |
| Operating/storage temperature | 0…+55°C/-25…+85°C | |
| Relative humidity | 95%, no condensation | |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | |
| Protect. rating/installation pos. | IP20/variable | |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc | |
| Approvals/markings | CE, UL, ATEX, IECEx | |






