-
AM8011 | Servomotor 0.20 Nm (M0), F1 (40В mm)
0,00 ₽The AM8011 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…230В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F1 (40В mm) and motor length 1 has a shaft diameter b = 8В h7 and a free shaft end of d = 25В mm.
-
AM8012 | Servomotor 0.38 Nm (M0), F1 (40В mm)
0,00 ₽The AM8012 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…230В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F1 (40В mm) and motor length 2 has a shaft diameter b = 8В h7 and a free shaft end of d = 25В mm.
-
AM8012-wCyz | Servomotor 0.38 Nm (M0), F1 (40В mm)
0,00 ₽The AM8012 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…230В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F1 (40В mm) and motor length 2 has a shaft diameter b = 8В h7 and a free shaft end of d = 25В mm.
-
AM8021 | Servomotor 0.50 Nm (M0), F2 (58В mm)
0,00 ₽The AM8021 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F2 (58В mm) and motor length 1 has a shaft diameter b = 9В k6 and a free shaft end of d = 20В mm.
-
AM8022-wDyz | Servomotor 0.80 Nm (M0), F2 (58В mm)
0,00 ₽The AM8022 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F2 (58В mm) and motor length 2 has a shaft diameter b = 9В k6 and a free shaft end of d = 20В mm.
-
AM8023-wFyz | Servomotor 1.20 Nm (M0), F2 (58В mm)
0,00 ₽The AM8023 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F2 (58В mm) and motor length 3 has a shaft diameter b = 9В k6 and a free shaft end of d = 20В mm.
-
AM8031-wCyz | Серводвигатель 1,37 Нм (М0), F3 (72В мм)
0,00 ₽The AM8031 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F3 (72В mm) and motor length 1 has a shaft diameter b = 14В k6 and a free shaft end of d = 30В mm.
-
AM8031-wFyz | Servomotor 1.40 Nm (M0), F3 (72В mm)
0,00 ₽The AM8031 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of OCT feedback system (absolute encoder). The standard servomotor with flange code F3 (72В mm) and motor length 1 has a shaft diameter b = 14В k6 and a free shaft end of d = 30В mm.
-
AM8032-wDyz | Servomotor 2.38 Nm (M0), F3 (72В mm)
0,00 ₽The AM8032 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is 2.38В Nm or 2.37В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F3 (72В mm) and motor length 2 has a shaft diameter b = 14В k6 and a free shaft end of d = 30В mm.
-
AM8033-wFyz | Servomotor 3.22 Nm (M0), F3 (72В mm)
0,00 ₽The AM8033 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is 3.22В Nm or 3.20В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F3 (72В mm) and motor length 3 has a shaft diameter b = 14В k6 and a free shaft end of d = 30В mm.
-
AM8033-wJyz | Servomotor 3.22 Nm (M0), F3 (72В mm)
0,00 ₽The AM8033 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is 3.22В Nm or 3.20В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F3 (72В mm) and motor length 3 has a shaft diameter b = 14В k6 and a free shaft end of d = 30В mm.
-
AM8041-wHyz | Servomotor 2.40 Nm (M0), F4 (87В mm)
0,00 ₽The AM8041 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 2.37…2.45В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F4 (87В mm) and motor length 1 has a shaft diameter b = 19В k6 and a free shaft end of d = 40В mm.
-
AM8042-wEyz | Servomotor 4.10 Nm (M0), F4 (87В mm)
0,00 ₽The AM8042 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor is 4.10В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F4 (87В mm) and motor length 2 has a shaft diameter b = 19В k6 and a free shaft end of d = 40В mm.
-
AM8043-wHyz | Servomotor 5.65 Nm (M0), F4 (87В mm)
0,00 ₽The AM8043 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 5.60…5.65В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F4 (87В mm) and motor length 3 has a shaft diameter b = 19В k6 and a free shaft end of d = 40В mm.
-
AM8044-wFyz | Servomotor 7.10 Nm (M0), F4 (87В mm)
0,00 ₽The AM8044 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 7.10В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F4 (87В mm) and motor length 4 has a shaft diameter b = 19В k6 and a free shaft end of d = 40В mm.
-
AM8051-wGyz | Servomotor 4.90 Nm (M0), F5 (104В mm)
0,00 ₽The AM8051 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 4.80…6.30В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 1 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8051-wJyz | Servomotor 6.30 Nm (M0), F5 (104В mm)
0,00 ₽The AM8051 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 4.80…6.30В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 1 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8051-wLyz | Servomotor 6.30 Nm (M0), F5 (104В mm)
0,00 ₽The AM8051 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 4.80…6.30В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 1 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8052-wFyz | Servomotor 8.20 Nm (M0), F5 (104В mm)
0,00 ₽The AM8052 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 8.20…10.7В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 2 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8052-wGyz | Servomotor 10.7 Nm (M0), F5 (104В mm)
0,00 ₽The AM8052 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 8.20…10.7В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 2 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8052-wJyz | Servomotor 8.20 Nm (M0), F5 (104В mm)
0,00 ₽The AM8052 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 8.20…10.7В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 2 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8053 | Servomotor 15.4 Nm (M0), F5 (104В mm)
0,00 ₽The AM8053 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 11.4…15.4В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 3 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8053-wLyz | Servomotor 15.4 Nm (M0), F5 (104В mm)
0,00 ₽The AM8053 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 11.4…15.4В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 3 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8053-wNyz | Servomotor 11.4 Nm (M0), F5 (104В mm)
0,00 ₽The AM8053 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 11.4…15.4В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 3 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8053-wPyz | Серводвигатель 13,3 Нм (M0), F5 (104В мм)
0,00 ₽Стандартный серводвигатель AM8053 подходит для приводных решений с высочайшими требованиями к динамике и производительности в диапазоне напряжений переменного тока 100–480 В В . Момент покоя двигателя зависит от обмотки и находится в диапазоне 11,4–15,4 Н·м. Он доступен с системой обратной связи OCT (абсолютный энкодер). Стандартный серводвигатель с кодом фланца F5 (104 В мм) и длиной двигателя 3 имеет диаметр вала b = 24 В k6 и свободный конец вала d = 50 В мм.
-
AM8054-wMyz | Servomotor 13.8 Nm (M0), F5 (104В mm)
0,00 ₽The AM8054 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 13.8…17.2В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F5 (104В mm) and motor length 4 has a shaft diameter b = 24В k6 and a free shaft end of d = 50В mm.
-
AM8061-wNyz | Servomotor 15.5 Nm (M0), F6 (142В mm)
0,00 ₽Data for 400 V ACAM8061-wNyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 15.5 Nm Rated torque 10.7 Nm Peak torque 37.1 […]
-
AM8062-wJyz | Servomotor 21.1 Nm (M0), F6 (142В mm)
0,00 ₽The AM8062 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 21.1…29.9В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 2 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8062-wLyz | Servomotor 21.1 Nm (M0), F6 (142В mm)
0,00 ₽The AM8062 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 21.1…29.9В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 2 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8063-wLyz | Servomotor 41.4 Nm (M0), F6 (142В mm)
0,00 ₽The AM8063 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 29.0…41.4В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 3 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8063-wQyz | Servomotor 41.4 Nm (M0), F6 (142В mm)
0,00 ₽The AM8063 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 29.0…41.4В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 3 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8063-wRyz | Servomotor 29.0 Nm (M0), F6 (142В mm)
0,00 ₽The AM8063 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 29.0…41.4В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 3 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8064-wNyz | Servomotor 49.70 Nm (M0), F6 (142В mm)
0,00 ₽Стандартный серводвигатель AM8064 подходит для приводных решений с высочайшими требованиями к динамике и производительности в диапазоне напряжений переменного тока 100–480 В В . Момент покоя двигателя зависит от обмотки и находится в диапазоне 35,0–49,0 Н·м. Он доступен с системой обратной связи OCT (абсолютный энкодер). Стандартный серводвигатель с кодом фланца F6 (142 В мм) и длиной двигателя 4 имеет диаметр вала b = 32 В k6 и свободный конец вала d = 58 В мм.
-
AM8064-wQyz | Servomotor 35.0 Nm (M0), F6 (142В mm)
0,00 ₽The AM8064 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 35.0…49.0В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 4 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8064-wRyZ | Servomotor 49.60 Nm (M0), F6 (142В mm)
0,00 ₽The AM8064 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 35.0…49.0В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F6 (142В mm) and motor length 4 has a shaft diameter b = 32В k6 and a free shaft end of d = 58В mm.
-
AM8071-wNyz | Servomotor 31.8 Nm (M0), F7 (194В mm)
0,00 ₽Data for 400 V ACAM8071-wNyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 31.8 Nm Rated torque 19.5 Nm Peak torque 79.90 […]
-
AM8071-wTyz | Servomotor 41.2 Nm (M0), F7 (194В mm)
0,00 ₽Data for 400 V ACAM8071-wTyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 41.10 Nm Rated torque 18.1 Nm Peak torque 78.0 […]
-
AM8072-wLyz | Servomotor 54.6 Nm (M0), F7 (194В mm)
0,00 ₽The AM8072 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 50.0…80.7В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F7 (194В mm) and motor length 2 has a shaft diameter b = 38В k6 and a free shaft end of d = 80В mm.
-
AM8072-wTyz | Servomotor 50.0 Nm (M0), F7 (194В mm)
0,00 ₽The AM8072 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 50.0…80.7В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F7 (194В mm) and motor length 2 has a shaft diameter b = 38В k6 and a free shaft end of d = 80В mm.
-
AM8072-wUyz | Servomotor 74.0 Nm (M0), F7 (194В mm)
0,00 ₽The AM8072 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 100…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 50.0…80.7В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F7 (194В mm) and motor length 2 has a shaft diameter b = 38В k6 and a free shaft end of d = 80В mm.
-
AM8073-wQyz | Servomotor 72.6 Nm (M0), F7 (194В mm)
0,00 ₽Data for 400 V ACAM8073-wQyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 72.6 Nm Rated torque 38.8 Nm Peak torque 275 […]
-
AM8073-wRyz | Servomotor 104 Nm (M0), F7 (194В mm)
0,00 ₽Data for 400 V ACAM8073-wRyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 104 Nm Rated torque 63.3 Nm Peak torque 275 […]
-
AM8073-wUyz | Servomotor 95.0 Nm (M0), F7 (194В mm)
0,00 ₽Data for 400 V ACAM8073-wUyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 95.0 Nm Rated torque 17.8 Nm Peak torque 268 […]
-
AM8074 | Servomotor 129 Nm (M0), F7 (194В mm)
0,00 ₽The AM8074 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 400…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 92.0…129В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F7 (194В mm) and motor length 4 has a shaft diameter b = 38В k6 and a free shaft end of d = 80В mm.
-
AM8074-wTy1 | Servomotor 92.0 Nm (M0), F7 (194В mm), with holding brake
0,00 ₽The AM8074 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 400…480В VВ AC voltage range. The standstill torque of the motor depends on the winding and is in the range of 92.0…129В Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F7 (194В mm) and motor length 4 has a shaft diameter b = 38В k6 and a free shaft end of d = 80В mm.
-
AM8074-wUyZ | Servomotor 129 Nm (M0), F7 (194В mm)
0,00 ₽Data for 400 V ACAM8074-wUyZ Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 100…480В VВ AC Standstill torque 129 Nm Rated torque 24.5 Nm Peak torque 355 […]
-
AM8112-wFyz | Servomotor 0.38 Nm (M0), F1 (40В mm)
0,00 ₽Data for 48 V DCAM8112-wFyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 24…48В VВ DC Standstill torque 0.38 Nm Rated torque 0.38 Nm Peak torque 1.36 […]
-
AM8113-wFyz | Servomotor 0.52 Nm (M0), F1 (40В mm)
0,00 ₽Data for 48 V DCAM8113-wFyz Motor type permanent magnet-excited three-phase synchronous motor Nominal voltage 24…48В VВ DC Standstill torque 0.52 Nm Rated torque 0.50 Nm Peak torque 2.04 […]
