-
Simatec TP 150 — комплект двойного съемника для валов диаметром 10–100 мм
261000,00 ₽Комплект двойного съемника, для валов диаметром от 10 до 100 мм
-
SKF EAZ 265MV-3A Fixed Induction Heater
0,00 ₽Fixed Induction Heater Medium Voltage 400 to 480V 50 Hz
-
SKF EAZ 292MV Fixed Induction Heater
0,00 ₽SKF EAZ 292MV Fixed Induction Heater Medium Voltage 400 to 480V
-
SKF HMV 16E Hydraulic Nut, M80x2 Thread
423225,00 ₽HMV E Series Hydraulic Nut, M80x2 Thread, 5mm Permitted Piston Displacement, 4200 mm2 Piston Area
-
SKF HMV 170E Hydraulic Nut, Tr850x7 Thread
9232425,00 ₽HMV E Series Hydraulic Nut, Tr850x7 Thread, 26mm Permitted Piston Displacement, 114 600mm2 Piston Area
-
SKF HMV 94E Hydraulic Nut, Tr470x5 Thread
2352825,00 ₽HMV E Series Hydraulic Nut, Tr470x5 Thread, 18mm Permitted Piston Displacement, 46 900 mm2 Piston Area
-
SKF HMVC 106E Hydraulic Nut, 4 Threads
2772225,00 ₽HMVC E Series Hydraulic Nut, 20.722 inch Pitch Diameter, 4 Threads, 0.83 inch Permitted Piston Displacement, 87.1 inch2 Piston Area
-
SKF HMVC 160E HMVC E Series Hydraulic Nut
6119100,00 ₽HMVC E Series Hydraulic Nut, G: 31.504 in. Pitch diameter: 31.3170 in. Threads per in: 3, Permitted piston displacement: 25mm, Piston area: 103 900
-
SKF LGHQ 2/SD250 – SYSTEM 24 TLSD Refill Set
182250,00 ₽SYSTEM 24 TLSD Refill Set-Note:Price is for 10 Units
-
SKF LHDF 900/5 Демонтажная жидкость, 300 мм2/с, 5 литров
22500,00 ₽LHDF 900 Dismounting Fluid, 300 mm2/s, 5 liter
-
SKF LHMF 300/1 Mounting Fluid, 300 mm2/s, 1 liter
6300,00 ₽LHMF 300 Mounting Fluid, 300 mm2/s, 1 liter
-
SKF THAP 030E Air-driven pumps and oil injectors 30 MPa (4 350 psi)
2780325,00 ₽Air-driven pumps and oil injectors 30 MPa (4 350 psi)
-
SKF THAP 150E Пневматические насосы и масляные инжекторы 150 МПа (21 750 фунтов на кв. дюйм)
3087450,00 ₽Пневматические насосы и масляные инжекторы 150 МПа (21 750 фунтов на кв. дюйм)
-
SKF THAP 300E Air-driven pumps and oil injectors 300 MPa (43 500 psi)
3368700,00 ₽Air-driven pumps and oil injectors 300 MPa (43 500 psi)
-
SKF THAP 400E Air-driven Hydraulic Oil Injector, 400 Mpa (58000 psi)
4071375,00 ₽Air-driven Hydraulic Oil Injector, 400 Mpa (58000 psi) Nominal Hydraulic Pressure, 0.64 cm3 Volume/stroke
-
SKF THAP 400E/SK1 Air-driven Hydraulic Oil Injector, 400 Mpa (58000 psi) Kit
0,00 ₽Air-drivenHydraulicOil Injector, 400 Mpa (58000 psi) kit, with Pressure Gauge and High-Pressure Pipe
-
SKF TMBP 20E – Blind Housing Bearing Puller
277650,00 ₽Съемник подшипников глухого корпуса (подходит для демонтажа следующих шарикоподшипников с глубокими канавками):
-
SKF TMFN 30-40 – Impact Spanner (195mm – 245mm Locknut Diameter)
58500,00 ₽High impact forces without nut damage
-
SKF TMFN 40-52 — ударный гаечный ключ (диаметр контргайки 250–310 мм)
80325,00 ₽High impact forces without nut damage
-
SKF TMFT 36 B35-62 Impact Ring Size B35-62
22725,00 ₽Impact Ring Size B35-62–Note:Price is for 3 Units
-
SKF TMHK 35 – OK Coupling Mounting and Dismounting Kit
663975,00 ₽OK Coupling mounting and dismounting kits Suitable for coupling size OKC 45-OKC 90
-
SKF TMHK 36 – OK Coupling Mounting and Dismounting Kit
877275,00 ₽OK Coupling mounting and dismounting kits Suitable for coupling size OKC 100-OKC 170, OKCS 178 -OKCS 360
-
SKF TMHK 41 – OK Coupling Mounting and Dismounting Kit
7910775,00 ₽OK Coupling mounting and dismounting kits Suitable for coupling size OKC 500 and larger
-
SKF TMHP 15/260 – Hydraulically-assisted Heavy Duty Jaw Puller
1870650,00 ₽Hydraulically-assisted Heavy Duty Jaw Puller (No. of arms: 3, Width of grip: 195-386 mm / 7.7-15.2 inches, Effective length of arms: 264 mm / 10.4 inches, Stroke: 100 mm / 3.9 inches, Maximum working pressure: 80 MPa / 11,600 psi, Maximum withdrawal force: 150 KN / 33,700 lbf)
-
SKF TMHP 15/260X – Hydraulically-assisted Heavy Duty Jaw Puller
1368900,00 ₽Heavy duty jaw puller without hydraulic pump (264mm length of arms)
-
SKF TMHP 30/600X – Hydraulically-assisted Heavy Duty Jaw Puller
2380725,00 ₽Heavy duty jaw puller without hydraulic pump (600mm length of arms)
-
SKF TMHS 75 Advanced Hydraulic Spindles
149625,00 ₽Advanced Hydraulic Spindles (Contents: 1 × hydraulic spindle, 2 × extension pieces, 50 and 100 mm (2.0 and 3.9 in.), 1 × nosepiece)
-
SKF TMIP 7-28 – Internal Bearing Puller Kit
217125,00 ₽Internal Bearing Puller Kit Supplied with 4 extractors covering bore diameters from 7 to 28 mm (0.28 to 1.1 in.)
-
SKF TMIP 7-60 – Internal bearing puller kits, 7-60 mm (0.28–2.4 in.) Bearing bore diameter
393300,00 ₽Internal bearing puller kits, 7-60 mm (0.282.4 in.) Bearing bore diameter
Bearing Tools
1 2
